Turnaround time: 3-5 Business Days on RTS Items (including transfers)

Sublimation Cloth

Regular price $0.55

Tax included.

Supplies needed: 
- sublimatable substrate (cloth) 
- sublimation transfer 
- clean teflon and/or scratch paper 
- repositionable adhesive spray 
- soft paper towel 
- lint roller 

Heat press settings: 
- temperature - 400 degrees F 
- dwell time - 1:00 to 1:15 minutes 
- pressure - medium 

Note: The recommended settings above may need adjustments for best results. 
Settings will vary depending on the heat press brand and model, ink and paper 
and atmospheric conditions. 

2nd Note: the soft paper towels help to trap ink that is dispersed outside of 
the edges of the substrate if there is an overprint area or full bleed in the 

Layer the press from the bottom pad to the top heat platen as follows: 
1. teflon sheet or scratch paper 
2. soft paper towel 
3. substrate and transfer 
4. teflon sheet or scratch paper 

1. Spray the transfer with a light coat of repositionable adhesive spray. 
2. Use a lint roller to remove debris from the substrate. 
3. Position the substrate onto the transfer. 
4. Place the transfer and substrate in the press onto the paper towel 
(transfer on top of substrate). 
5. Place the teflon sheet or scratch paper over the substrate and transfer. 
6. Press the substrate using the appropriate heat, dwell and pressure settings
7. Remove the transfer from the substrate and items from the press 
immediately. Use heat resistant gloves if necessary - the items will be very 

- If the image of the final product appears light, increase the pressure 
slightly or increase the dwell time slightly (5-10 seconds). 
- If the image on the final product appears blurred or substrate appears 
yellowed, reduce the dwell time slightly (10-20 seconds).